Juniper-networks SRX 210 Manual de usuario descargar pdf (Pagina 93)

CHAPTER 14

Connecting the SRX210 Services Gateway

to Management Devices

This chapter includes the following topics:

•

Connecting an SRX210 Services Gateway to the J-Web Interface on page 77

•

Connecting an SRX210 Services Gateway to the CLI Locally on page 79

•

Connecting an SRX210 Services Gateway to the CLI Remotely on page 80

•

Connecting the Modem at the SRX210 Services Gateway End on page 81

•

Connecting the Modem to the Console Port on the SRX210 Services Gateway on page 82

•

Connecting to the CLI at the User End for the SRX210 Services Gateway on page 83

Connecting an SRX210 Services Gateway to the J-Web Interface

If you plan to use the setup wizard to configure the SRX210 Services Gateway, you must

connect your management device (such as a laptop or desktop computer) to one of the

built-in Ethernet ports 0/1 through 0/7 as shown in Figure 24 on page 78. Do not use

built-in Ethernet port 0/0.

NOTE: To access the J-Web interface, your management device requires a

supported browser: either Microsoft Internet Explorer version 7.0 or Mozilla

Firefox version 3.x.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 175 176

Sin comentarios

Juniper-networks SRX 210 Manual de usuario Pagina 93