Juniper-networks SRX 210 Manual de usuario Pagina 120

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 176
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 119
Table 37: Component LEDs on the Services Gateway (continued)
Possible Causes and
Corrective ActionsMeaningStateLED
A major alarm indicates a
critical situation on the
gateway that requires
immediate action.
See “Monitoring the SRX210
Services Gateway Using
Chassis Alarm Conditions”
on page 105.
The device detects a major
alarm.
RedAlarm LED
A minor alarm requires
monitoring or maintenance.
If left unchecked, it might
cause an interruption in
service or degradation in
performance.
See “Monitoring the SRX210
Services Gateway Using
Chassis Alarm Conditions”
on page 105.
The device detects a minor
alarm.
Amber
Normal condition. No action
is required.
The device is starting up.
NOTE: When the system is
up and running, if the Alarm
LED is off, it indicates that no
alarms are present on the
device.
Off
Normal condition. No action
is required.
The device is receiving power
and is functioning normally.
GreenPower LED
Normal condition. No action
is required.
The Power button has been
pressed and quickly released.
Amber
Normal condition if the
services gateway is
switched off. No action is
required.
If you have not powered off
the services gateway, verify
that the AC power cord
from the power source to
the device is not damaged,
the socket is in working
condition, and the device
has an AC input voltage
between 110 and 240 VAC.
See “Monitoring the SRX210
Services Gateway Power
System” on page 108.
The device is not receiving
power.
Off
Copyright © 2013, Juniper Networks, Inc.104
SRX210 Services Gateway Hardware Guide
Vista de pagina 119
1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 175 176

Comentarios a estos manuales

Sin comentarios