Juniper-networks SRX 210 Manual de usuario Pagina 101

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 176
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 100
CHAPTER 15
Performing Initial Software Configuration
on the SRX210 Services Gateway
This chapter includes the following topics:
SRX210 Services Gateway Software Configuration Overview on page 85
Performing Initial Software Configuration on the SRX210 Services Gateway Using the
CLI on page 89
Performing Initial Software Configuration on the SRX210 Services Gateway Using the
J-Web Interface on page 91
SRX210 Services Gateway Secure Web Access Overview on page 95
SRX210 Services Gateway Software Configuration Overview
This topic includes the following sections:
Preparing the SRX210 Services Gateway for Configuration on page 85
Understanding the Factory-Default Configuration on page 86
Understanding Built-In Ethernet Ports and Initial Configuration on page 86
Mapping the Chassis Cluster Ports on page 87
Understanding Management Access on page 88
Preparing the SRX210 Services Gateway for Configuration
The services gateway is shipped with the Juniper Networks Junos operating system (Junos
OS) preinstalled and ready to be configured when the device is powered on.
You can perform the initial software configuration of the services gateway by using the
browser-based setup wizard or by using the command-line interface (CLI).
Before configuring the device, gather the configuration information required to deploy
the device in your network. At minimum, the setup wizard requires the following
information:
Device name to be used on the network
Password for the root user
85Copyright © 2013, Juniper Networks, Inc.
Vista de pagina 100
1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 175 176

Comentarios a estos manuales

Sin comentarios