Juniper Networks EX3200 Manual de usuario descargar pdf (Pagina 150)

Figure 43: Sliding the Rear Brackets to the Rear of a Four-Post Rack

g004478

Side-rail

bracket

Switch

Rear brackets

9. Attach the rear brackets to the rear post by using the appropriate screws for your

rack. Tighten the screws.

10. Ensure that the switch chassis is level by verifying that all the screws on the front

of the rack are aligned with the screws at the back of the rack.

11. If the switch is an EX4200-24F model, we recommend that you insert dust covers

in any unused SFP ports.

Related Topics ■ Connecting Earth Ground to an EX Series Switch on page 141

■ Connecting AC Power to an EX3200 or EX4200 Switch on page 146

■ Connecting DC Power to an EX3200 or EX4200 Switch on page 148

■ Connecting and Configuring an EX Series Switch (CLI Procedure) on page 161

■ Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 163

■ Mounting an EX3200 or EX4200 Switch in a Recessed Position in a Rack or

Cabinet on page 124

■ Rack-Mounting and Cabinet-Mounting Warnings for EX Series Switches on

page 221

Mounting an EX3200 or EX4200 Switch in a Recessed Position in a Rack or Cabinet

You can mount an EX3200 or EX4200 switch in a rack or cabinet such that the switch

is recessed inside the rack from the rack front by 2 inches. You can use the 2-in.-recess

front brackets provided in the separately orderable four-post rack-mount kit to mount

the switch in a recessed position.

Reasons that you might want to mount the switch in a recessed position include:

■ You are mounting the switch in a cabinet and the cabinet doors will not close

completely unless the switch is recessed.

124 ■ Mounting an EX3200 or EX4200 Switch in a Recessed Position in a Rack or Cabinet

Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 283 284

Sin comentarios

Juniper Networks EX3200 Manual de usuario Pagina 150