Juniper-networks JUNOS OS 10.4 Manual de usuario Pagina 175

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 208
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 174
Router 2’s east control channel interface is ge-1/0/2.1 (the RPL) and the west control
channel interface is ge-1/2/1.1. The protection group is pg102.
Router 3’s east control channel interface is ge-1/0/3.1 (the RPL) and the west control
channel interface is ge-1/0/4.1. The protection group is pg103.
NOTE: Although not strictly required for physical ring protection, this example
configures Ethernet OAM with MEPs.
Router 1 (RPL Owner) Configuration
To configure Router 1 (the RPL owner):
1. Configure the interfaces:
[edit]
interfaces {
ge-1/0/1 {
vlan-tagging;
encapsulation flexible-ethernet-services;
unit 1 {
encapsulation vlan-bridge;
vlan-id 100;
}
}
ge-1/2/4 {
vlan-tagging;
encapsulation flexible-ethernet-services;
unit 1 {
encapsulation vlan-bridge;
vlan-id 100;
}
}
irb {
unit 0 {
family inet {
address address 192.1.1.11/24;
}
}
}
}
2. Configure the bridge domain:
[edit]
bridge-domains {
bd1 {
domain-type bridge;
vlan-id 100;
interface ge-1/2/4.1;
interface ge-1/0/1.1;
routing-interface irb.0;
}
}
155Copyright © 2013, Juniper Networks, Inc.
Chapter 13: Ethernet Ring Protection
Vista de pagina 174
1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 207 208

Comentarios a estos manuales

Sin comentarios