Juniper-networks JUNOS OS 10.4 Manual de usuario descargar pdf (Pagina 124)

forwarding-class expedited-forwarding;

}

term t1 {

from {

traffic-type [ broadcast unknown-unicast multicast ];

}

then policer bcast-unknown-unicast-non-ip-mcast-policer;

}

Apply the firewall filter as an input filter to the customer interface at ge-2/1/0:

[edit interfaces]

ge-2/1/0 {

vlan-tagging;

encapsulation flexible-ethernet-services;

unit 5 {

encapsulation vlan-vpls;

vlan-id 9;

family vpls {

filter {

input customer-1;

}

Documentation

Layer 2 Firewall Filters•

• Firewall Filters for Bridge Domains and VPLS Instances on page 101

• Example: Configuring Filtering of Frames by MAC Address on page 104

• Example: Configuring Filtering of Frames by IEEE 802.1p Bits on page 106

• Example: Configuring Filtering of Frames by Packet Loss Priority on page 107

Example: Configuring Filtering of Frames by MAC Address

This example firewall filter finds frames with a certain source MAC address

(88:05:00:29:3c:de/48), then counts and silently discards them. For more information

about configuring firewall filter match conditions, see the Routing Policy Configuration

Guide. The filter is applied to the VLAN configured as vlan100200 as an input filter on

Router 1.

NOTE: This example does not present exhaustive configuration listings for

all routers in the figures. However, you can use this example with a broader

configuration strategy to complete the MX Series router network Ethernet

Operations, Administration, and Maintenance (OAM) configurations.

Junos OS 13.1 MX Series 3D Universal Edge Routers Solutions Guide

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 207 208

Sin comentarios

Juniper-networks JUNOS OS 10.4 Manual de usuario Pagina 124