Juniper-networks ERX-1410 Manual de usuario descargar pdf (Pagina 148)

APPENDIX C

Cable Pinouts

C-4

Table C-3 lists the pinout for the crossover adapter.

Table C-4 lists the pinout for the straight-through adapter.

CT1 and CE1 I/O Modules

CT1 I/O modules have 24 RJ-48C female connectors. CE1 I/O modules

have either 20 RJ-48C female connectors or two 25-pair female Telco

connectors. Figure C-3 shows the location of the ports on a CT1 I/O

module and the sequence of the pins in the RJ-48C connector. CE1 I/O

modules equipped with RJ-48C connectors have the same configuration

as CT1 I/O modules equipped with RJ-48C connectors.

Table C-3 DB-9 – RJ-45 crossover adapter pinout

DB-9 Pin Signal RJ-45 Pin

1 DCD 1

2 RXD 3

3 TXD 2

4 DTR 6

5 GND 5

6 DSR 4

7 RTS 8

8 CTS 7

9 RNG n/c

Table C-4 DB-9 – RJ-45 straight-through adapter pinout

DB-9 Pin RS-232 Signal Name RJ-45 Pin Ethernet Signal Name

1 DCD 1 TX +

2 RXD 2 TX –

3 TXD 3 RX +

4 DTR 4 n/c

5 GND (signal) 5 n/c

6 DSR 6 RX –

7 RTS 7 n/c

8 CTS 8 n/c

9 RNG n/c none

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 183 184

Sin comentarios

Juniper-networks ERX-1410 Manual de usuario Pagina 148