Juniper Networks MX240 Manual de usuario descargar pdf (Pagina 90)

3. Start the CLI.

root# cli

root@>

4. Enter configuration mode.

cli> configure

[edit]

root@#

5. Configure the name of the router. If the name includes spaces, enclose the name

in quotation marks (“ ”).

[edit]

root@# set system host-name host-name

6. Configure the router’s domain name.

[edit]

root@# set system domain-name domain-name

7. Configure the IP address and prefix length for the router’s Ethernet interface.

[edit]

root@# set interfaces fxp0 unit 0 family inet address address/prefix-length

8. Configure the IP address of a backup router, which is used only while the routing

protocol is not running.

[edit]

root@# set system backup-router address

9. Configure the IP address of a DNS server.

[edit]

root@# set system name-server address

10. Set the root authentication password by entering either a clear-text password,

an encrypted password, or an SSH public key string (DSA or RSA).

[edit]

root@# set system root-authentication plain-text-password

New password: password

Retype new password: password

[edit]

root@# set system root-authentication encrypted-password encrypted-password

[edit]

root@# set system root-authentication ssh-dsa public-key

62 ■ Configuring the JUNOS Software

MX240 Ethernet Services Router Hardware Guide

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 241 242

Sin comentarios

Juniper Networks MX240 Manual de usuario Pagina 90