Juniper-networks M20 Manual de usuario descargar pdf (Pagina 28)

Multilink Services PIC

■

JUNOS 4.3 and laterSoftware release

■

Power requirement: 0.17 A/48 V= 8 W

■

Available versions:

■

4 multilink bundles

■

32 multilink bundles

■

128 multilink bundles

■

Can be used as a discrete connection or as a channel

NOTE: If you configure a unit number larger than the allowable limit on the 4-bundle or

32-bundle Multilink Services PIC, an error will be logged in /var/log/messages and the

configuration will fail.

Description

■

Supports up to eight links per multilink bundle

■

Bonding T1 links enable service ranging from 1.5 Mbps through 12 Mbps

■

Bonding E1 links enable service ranging from 2 Mbps through 16 Mbps

Hardware features

■

Full configuration flexibility

■

Bundles can be built from any interface within the chassis

■

Enables providers to offer a scalable multimegabit access service based on T1 or E1 links

■

Protocol support:

■

Multilink PPP—MLPPP (RFC 1990) for T1 and E1 bonding

■

Multilink Frame Relay—MLFR (FRF.15) for T1 and E1 bonding

NOTE: This PIC does not support graceful switchover. Graceful switchover can not be configured

on routers that this PIC is installed in.

Software features

■

NoneCables and connectors

28 ■ Multilink Services PIC

M20 Internet Router PIC Guide: End-of-Life PICs

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34

Comentarios a estos manuales

Sin comentarios

Juniper-networks M20 Manual de usuario Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Juniper-networks M20