Juniper-networks E-Series Manual de usuario Pagina 205

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 242
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 204
A
Cable Pinouts
This appendix lists the cables and connector pinout assignments for the
cables used with the ERX-7xx models and ERX-14xx models.
SRP I/O Module
The SRP I/O module provides two management ports. You can connect
a console directly to the RS-232 serial port using a shielded
straight-through cable with a female DB-9 connector on one end and a
male DB-25 with a crossover adapter on the DB-25 end. This port is
called the serial port, the RS-232 port, or the console serial port.
Figure A-1 shows the location of the serial port and the sequence of the
pins in the RS-232 connector.
The console port is considered a data terminal equipment interface
(DTE). Direct connection to a terminal or PC (which also have DTE
interfaces) requires a crossover cable.
Topic Page
SRP I/O Module A-1
CT1 and CE1 I/O Modules A-4
Vista de pagina 204
1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 241 242

Comentarios a estos manuales

Sin comentarios