Juniper Networks IDP250 Manual de usuario Pagina 40

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 84
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 39
Mounting to Midmount Brackets
To mount the appliance using the midmount brackets:
1. Attach one rack-mounting bracket to each side of the chassis with the bracket
screws.
Figure 10: 1-RU Midmount Bracket
2. With another person, place the chassis into position between rack posts in the
equipment rack and align the rack-mounting bracket holes with the rack post
holes.
CAUTION: Be sure to leave at least two inches of clearance on the sides of each
chassis for the cooling air inlet and exhaust ports.
3. Secure the chassis to the rack with the rack screws.
24 Mounting to Midmount Brackets
IDP250 Installation Guide
Vista de pagina 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 83 84

Comentarios a estos manuales

Sin comentarios